What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 01:56

For this case there are devices called Metal oxide varistors (MOV).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The other is “what does a “fuse” do?”
Why won't my mom let me come home if I'm homeless?
eight
[image of Common-mode choke]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Can I know a love story of a medical student?
2024–10–10[John johnson John Johnson ]
This device then solves the entire problem.
what exactly is a ‘surge’ protector?
(Dc diagram shown, AC is similar).
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
[old diagram got deleted by accident]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
There are two important concepts here.
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
Barnstars:
Why do narcissists avoid talking about the real issues?
In schematic diagrams this is the symbol for a fuse:
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–14 [Omar Gharbi Omar Gharbi ]
the problem then depends on "how fast does the fuse operate?".
It also is a device that limits the change in current flow.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A circuit breaker is similar, but is resettable.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Edit 2024–10.
Why was Boromir corrupted by the One Ring, but not Faramir in The Lord of the Rings?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
What is lightning?
but this device (an Inductor) … impedes the rapid changes in the current.
In my experience, British people are fat, ugly and arrogant. Why is it and can it be changed?
So, the voltage could go up to 500 volts, and the fuse will not open up.
These devices are installed between the “hot” and “neutral” and protective ground.
so, what happens?
One
One is “what exactly is in a ‘surge protector’ ? ”
But it can get overloaded, and no longer works.
It seems Mohan does not understand the difference between a comment and an Answer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is where the MOV conducts again, and dissipated the energy.
Who was the guy that had sex with the AIDS monkey?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
An AC voltage/ current source, and an ac inductive load.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Why do almost all vertebrates have tails, but not apes and frogs?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This one hit behind the barn.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
He then asserts :
Upvotes:
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
nine
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is 'the assistant's answer'
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is where this question deviates from being a 'generic' question, and becomes more specific.
Now when you have a certain ac resistance, then a current flows in a loop.
At least they know the answer if they wanted it.
I post the exact comment here.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
There are three different concepts here that are getting confused.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Here is a simplified AC power diagram.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The third is lightning and “how it gets conducted into a home.”
But… the neutral is now “floating” because of the 1 ohm resistance.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
He then describes Rainy Season and Lightning.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
A fuse is a non-resetable over current circuit protector.
First Sentence:
He then describes the function of a fuse.
but I think this circuit , shows a few more pieces.
At one ohm, the resistor has a maximum of 1 watt power.
a photo is worth a thousand words.
2024–10–16 [ OO OLAOYE OYEBODE ]
What does a fuse do?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Because the load is inductive, the current lags the voltage.(by a bit).
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.